Vivax CF- 310 NFX, Instruction Manual

Page: 100 / 120

ENG
VIVAX
21
Tips for Energy savings
Try not to open the door too often, especially when the weather is wet and hot. Once you open
the door, close it as soon as possible.
Every now and then check if the appliance is sufficiently ventilated (adequate air circulation
behind the appliance).
In normal temperature conditions, please arrange the thermostat at the middle setting.
Before loading the appliance with packages of fresh food, make sure they are cooled to
ambient temperature.
Ice and frost layer increase energy consumption, so clean the appliance as soon as the layer
is 3-5 mm thick.
◆
If it is the outer condenser, the rear wall should be always clean free of dust or any
impurities.
◆
The appliance should be located in the coolest area of the room, away from heat
producing appliances or heating ducts, and out of the direct sunlight.
◆
Let hot foods cool to room temperature before placing in the appliance.
◆
Overloading the appliance forces the compressor to run longer.
7 Assemble the door of
freezer chamber on the
lower hinge
8 Assemble middle
hinge assembly to
left side of the
cabinet
9 Assemble the door of
refrigerating;
Take on knuckle
guard