Vivax ACP-18COFM50GEI, Service Manual, Page: 18 / 51

Unscrew the screws fixing the motor support ,
and then lift it upwards to remove it. Unscrew the
screws fixing the motor to remove it.
Unscrew the nut fixing the fan with a spanner to
take out the fan.
8. Disassemble the motor
7. Disassemble Axial Flow Fan
Unscrew the fastening nut of the four-way valve
coil and remove the coil. Wrap the four-way valve
with wet cotton and unsolder the 4 weld connect-
ing the four-way valve to take it out. (Note:Refrig-
erant should be discharged firstly.)
Welding process should be as quick as possible
and keep wrapping cotton wet all the time. Be
sure not to burn out the lead-out wire of
compressor.
Screws
Axial flow fan
Nut
9. Disassemble Four-way Valve
Four-way valve
Weld
Four-way
valve coil
Motor
Motor support