Vivax ACP-09CIFM25AEEI, User Manual, Page: 14 / 153

Function buttons(continued)
TIMER OFF Button
LOCK Button
14
15
Model: R51I5/BG(C)E
TEMP
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
MODE
FAN SPEED
SWING TIMER ON
ECONOMY
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( C)
FOLLOW
ME
LED
DISPLAY TURBO
11
ECONOMY/SLEEP Button
Press this button to activate the Energy-Saving mode.
Press again to stop the function. This function is
available on COOL, HEAT or AUTO mode only and
maintain the most comfortable temperature for you.
12
Press this button to activate the Auto-off time setting.
Each press will increase the time setting in 30 minutes
increments, up to 10 hours, then at 1 hour increments
up to 24 hours. To cancel the Auto-off time setting, just
press the button until the time setting is 0.0.
13
Turbo Button
Press this button to clear the display on the unit,press it
again to light the display .
LED Display Button
TIMER ON OFF
SET TEMPERATURE
Transmission Indicator
Temp./Timer display
FAN SPEED display
MODE display
ON/OFF display
This transmission indicator will light
when remote controller transmits
signals to the indoor unit.
Displays the current selected mode.
Including AUTO, COOL, DRY, HEAT
(cooling & heating models only) and
FAN.
The temperature setting (from 17 C/62 F
to 30 C/88 F) or timer setting (0~24h)
will be displayed. If FAN only mode is
selected, there will be no display.
o O
o O
This indicator will be displayed when
the unit is operating.
Displays the selected fan speed:
AUTO, HIGH,
when the fan speed
is selected in AUTO speed. When
AUTO or DRY Mode is selected, there
will be no signals displayed.
MED and LOW.
Nothing displays
This display area shows the settings
of the TIMER. That is, if only the
Auto-on time function is set, it will
display TIMER ON. If only the Auto-off
time function is set, it will display
TIMER OFF. If both functions are
set, it will display TIMER ON OFF
which indicates you have chosen both
the Auto-on time and Auto-off time.
LOCK display is displayed when
pushing the LOCK button. Push the
LOCK button to clear display.
MODE display
(FAN mode)
FOLLOW ME display
When pressing FOLLOW ME button
in COOL or HEAT mode, the remote
sensing function is activated and this
indicator displays.
TIMER display
LOCK Indicator
Indicators on LCD
NOTE: While the unit is running under ECONOMY/
SLEEP mode,it would be cancelled if ON/OFF, FAN
SPEED, SLEEP or MODE button is pressed.
When you press the Lock button,all current settings are
locked in and the remote controller does not accept any
operation except that of the Lock. Press again to cancel
the Lock mode.
Push this button to activate the Turbo function which
enables the unit to reach the preset temperature at
cooling or heating operation in the shortest time(if the
unit has no this function, there is no corresponding
operation happened when press Turbo button.)
Used to select the fan speed in four steps:
Auto Low Med High
FAN SPEED Button
10
TIMER ON Button
9
Press this button to activate the Auto-on time setting.
Each press will increase the time setting in 30 minutes
increments, up to 10 hours, then at 1 hour increments
up to 24 hours. To cancel the Auto-on time setting, just
press the button until the time setting is 0.0.
TEMP
AUTO
COOL
DRY
HEAT FAN
HIGH
MED
LOW
MODE
FAN SPEED
SWING TIMER ON
SLEEP
ON/OFF
TIMER OFF
RESET LOCK
SET TEMPERATURE( F)
LED
DISPLAY
ION
Model: RG51I42/BG(C)EU;
RG51I41/BG(C)EFU2.
NOTE:
RG51I42/BG(C)EU without
FOLLOW ME indicator light.
PDF created with pdfFactory Pro trial version www.pdffactory.com