9
O P T I C A L F M C R U I S E R
8
O P T I C A L F M C R U I S E R
Touch-On Technology
Your mouse comes with an advanced human body detect
sensor which can detect when the hand touches the
mouse. The sensor is on both the left and right side of the
mouse. When your hand is close to or touches the sensor
area, the mouse works immediately. And when your hand
move off the mouse for more than 2 seconds, the mouse
enters sleep mode to save power.
Caution:
The mouse cannot work if your hand is not
touching the sensor area.
Software Installation
Please follow the following steps to install your mouse driver:
Step 1:
Insert your driver disk into the floppy driver.
Step 2:
Go to the “Start” Menu and select “Run”.
Step 3:
Type “A:\Setup” then press the “Enter” button on your keyboard.
Step 4:
Follow the on-screen instructions, the system will then install the
driver automatically.
Step 5:
Reboot your system while completing the installation process.
Mouse Utility
Double-click the mouse icon in the bottom right corner of the Windows
®
screen. Then the following window will open. For a more detailed description,
please review each item as below:
Scroll Ball Setting:
Step 1:
Choose
“System Default Mode“
to be
compatible with Intelli-Mouse functions.
Step 2:
Choose
“Enhance Scroll Mode“
to support the
new useful functions of the 360° Scroll Ball.
Left Sensor Area
Button Setting:
• Launch Default Browser:
Mark this function to obtain the path to access the
IE and Netscape application by pressing the scroll button.
• Launch Default E-Mail:
Mark this function to obtain the path to access the E-Mail
application by pressing the scroll button.
• Control (Office Zoom):
Hold the “Ctrl“ key of the keyboard by pressing down
the scroll button.
• Shift:
Hold the “Shift“ key of the keyboard by pressing down the scroll button.
• Zoom:
This gives you a certain pan area by inputting the numbers ranging from
2 X 2 to 64 X 48 in “Zoomed Size“. You can also enlarge the content of the pan
area by inputting the factor number from 2 to 8 in ” Zoom Factor “.
• Auto Scroll:
Provides a fixed movement speed for horizontal and vertical scrolling.
• Others:
Choose this function for easy application changes such as frequently
using Keys on Keyboard, Minimize windows, Page up, Page down ….etc. by
clicking the button.
Troubleshooting
(
Try one or more of the following!)
Mouse Does Not Work Upon Installation:
• For optimal performance, place the receiver at least eight inches or 20 cm away
from the mouse or other electrical devices, such as computer, or external drive.
• Make sure you have installed the batteries correctly.
• If you are working on a metallic surface, try using a mouse pad and turning the
receiver on its side for better reception.
• Follow the “Change ID” steps to create a new ID for mouse and receiver.
Mouse Not Detected:
• Make sure the receiver cable is plugged into the right mouse port.
• Make sure your mouse port has the proper configuration.
Refer to your computer documentation for the correct port configuration.
• You may have other system devices (e.g. a LAN card) that conflict with your
mouse. Check the IRQ/address settings of these devices for conflicts,
and change the settings as required.
The Screen Cursor Does Not Move Properly:
• Change the position of your receiver or mouse, because it may be too far from
the mouse; or some object may be interfering with the receiver's radio reception.
• Make sure that the battery power is sufficient. Replace batteries if needed.
• You may also need to change the channel / ID for the mouse.
• If your tabletop surface is red in color, transparent like glass or highly reflective
like a mirror, it may be interfering with the optical sensor of the mouse.
Try using a mouse pad, or use the mouse on a different tabletop surface.
Right Sensor Area
