23407
5 port 10/100 Fast Ethernet Switch
2
GB
Introduction
Thank you for purchasing the Vivanco 10/100 Fast Ethernet Switch. This switch offers you a high-
performance but simple-to-use solution to connect up to 5 PCs within an Ethernet or to create a sub-
network within a large Ethernet. It provides a full 10/100Mbps Ethernet connection at each port.
Hardware connections
Ports 1-5
:
On the back of the Switch you will find five RJ45 ports for connection to your PCs or
other Ethernet switches/hubs.
Please note: Category 5 cables are recommended for use with this product in
structured wiring environments.
Power
connection
:
On the left side of the Switch you will find the power port to connect the power adapter included in the
package. To avoid any damage, use only this power adapter and no other.
Installation
The five RJ45 UTP/STP ports support the automatic MDI/MDIX crossover detection function to provide
true ‘plug and play’ capability. With the Auto-MDI function you need only plug the network cable into
the switch itself and not concern yourself whether the other end of the cable is connected to a Network
Interface Card or a switch/hub.
Connect the Switch’s AC power adapter to the Switch’s Power port. Plug the other end of the adapter
into an AC outlet. When connected, the AC power adapter to the switch’s Power port and AC outlet
will immediately power on this Switch.
LEDs
When the Switch installation is completed, check the LED indicators for the status.
POWER
This indicator lights green when the switch is receiving power.
Link/ACT
This indicator lights green when the port is connected to a station.
The blinking indicator shows that this port is transmitting or receiving data on the network.
