Vivaldi GIOVE FREENET, User Manual

Page: 24 / 32

23
APPENDIX A
SETUP
The SETUP menu allows to regulate some parameters, for the functions
TONE, MEM, FM, DISPLAY and INFO, please take for reference p. 9
of this manual.
SYS SETUP (from 3.7 version): menu protected by access code for set-
ting the volume parameters and data cancelling. The access code to
the submenu is: 4 7 2 0 (not modifiable).
The access code is inserted by scrolling numbers using the keys + and
-, then confirming them by the ENTER key. Once the four numbers are
inserted, the following menus appear:
CONFIGNET: setting the control ID on the RS485 bus. Set the value
by the + and – keys, select ENTER and confirm by the >> key.
AUDIO: menu dedicated to the settings of the value of the maximum
settable volume, of the mono or stereo modality and of the activation of
the LPF crossover (Low Pass Frequency), accessible only in mono mo-
dality.
---MAX: value settable from 10 to 50 Db, it is the maximum peak,
beyond that the volume can not be set. Default value is 50 dB. Once
chosen the desired value, press the ENTER key and confirm with the
arrow key on the right >>.
---MODE: value settable as MONO or STEREO, it allows to make the
Giove FREENET outputs mono, that means having the same audio
infos output both in the right channel as in the left, or stereo, that means
having in the right channel different audio infos from the left. Once cho-
sen the desired value, press the ENTER key and confirm with the arrow
key on the right >>.
---LPF: acronym for Low Pass Frequency, activable only when it has
been first chosen the MONO modality, it allows to set up a cut-off fre-
quency in the Giove FREENET outputs. Settable values OFF, 55 Hz,
85 Hz, 120 Hz and 160 Hz. Once chosen the desired value, press the
ENTER key and confirm with the arrow key on the right >>.