Colour Changing Soothing Sounds Machine
K809
Instructions for Use
Please read and retain these instructions for future reference
v001: 04/05/22
The Enterprise
Department
UK Head Office, 11 Bridge Street, Bishop’s Stortford, CM23 2JU
Tel: 0844 4824400*, Fax: 01279 756595
www.coopersofstortford.co.uk
EU address: D.S.B. LD, 160 Bd. de Fourmies, 59100 Roubaix, France
Tel: (+44) 1279 701269
*UK Calls cost around 7 pence per minute plus your telephone company’s networ
k access.
Please check with your telephone supplier.
8.
Power indicator status:
Single blue light: Normal startup state (non-charging)
Single blue light flashing: Low battery (non-charging)
Single red light: battery charging (Not on, charging)
Single green light: on standby/full battery( (Not on, charging)
Blue/red light simultaneously on: Normal on and charging status (Charging)
Blue/green light simultaneously on: Normal standby status and full charged (charging)
9.
Memory Function:
Recording Last Use Status (Volume level, sound Sounds type, light colour and Turn-
off time)
The last memory setting will be played by default.
FAQs:
1.
There is no sound after the power is switched on.
Please check if the battery is too low (Whether
the power light
②
blue light flashes or lights up) and connect power to try again.
2.
Can't charge
. Please connect the power supply, check whether the indicator light is working, refer
to the indicator light
②
status:
3.
Can't play sound.
Troubleshooting plan: Check if the power light
②
is on blue.
If there is no blue light on, please press and hold the power switch button for 3 seconds
to
restart the machine.
When the battery power is lower than 3.3V, the blue light of the machine status light will flash, and
the sound will be played and the light will be on at the same time. The light will flash when the
battery is low, which is a normal phenomenon. Plug in the charger and charge timely can prevent
reoccurrence.
Precautions:
•
No user serviceable parts.
•
Keep dry.
•
Keep away from heat.
Cleaning and Maintenance
•
Wipe the surface with a soft wet towel. Do not wipe or clean the product with a corrosive detergents.
Power connection:
Insert the USB receiver into the energizing port and plug the other end into the power port.
This product is suitable for general USB interface line, which can be connected to mobile power supply,
