VIO10-P
PROFIBUS-PA REMOTE I/O
INSTALLATION, OPERATION, CONFIGURATION AND MAINTENANCE MANUAL
______________________________________________________________________________________________________________________________
29
6.2.
TECHNICAL SPECIFICATION
The table below shows Technical specifications for VIO10-P.
Table 6.1 – Technical specifications for VIO10-P.
Accuracy
Temperature: According to Tables 6.2, 6.3 and 6.4
Inputs/Outputs: ± 0.1% Calibrated Span
Supply Voltage / Quiescent Current
Output Load Limit
9 to 32 Vcc, no polarity / 12 mA
Protocol of Communication / Function
Block
Profibus-PA /
16 Discrete Input (DI)
08 Discrete Output (DO)
03 Analog Input (AI)
02 Analog Output (AO)
Certification in Hazardous Area
Intrinsically Safe (pending)
Ambient Temperature Limit
-20 to 70°C
Configuration
Remote configuration through tools based on EDDL or FDT / DTM. Local
configuration via magnetic key.
Mounting
In field or panel, using DIN rail
Degree of Protection
IP20
Type of Electrical Insulation (between
Profibus-PA bus, inputs and outputs)
Galvanic Isolation, 1,5 kVac
Housing Material
Aluminum / Plastic
Approximate weight
500 g
Discrete Inputs
16 Inputs
Typical external power supply: 24 Vdc (18 to 30 Vdc, maximum consumption
120mA)
Optical Isolation of 5,000 Vac.
Level in ON state (True Logical) 15 - 30 Vdc.
Level in OFF state (Logical False) 0 - 5 Vdc
Typical Impedance 3.9 k
Ω
.
Discrete Outputs
8 Outputs: NPN transistors, open collector. They work with relays, solenoids
and other DC loads with maximum current of 0.5 A per output. All outputs
share the same ground and are isolated from each other, as well as from the
Profibus-PA network.
Typical external power supply 24 Vdc (18 to 30 Vdc, max. 40mA) - same
source of inputs, 24Vdc
Optical Isolation of 5,000 Vac
Maximum switching voltage: 30 Vdc
Maximum Saturation Voltage: 0.55 V at 0.5 A
Maximum Output Current: 0.6 A
Indication logic: ON when the transistor is on.
Power-Up Condition: OFF
Thermal Protection: Thermal Shutdown: 150-200 ° C; Thermal Hysteresis 10
at 25 ° C; Over current protection: 1.3 A at 24 Vdc maximum
* With inductive loads use RC filters or diode in reverse mode as filter.
