3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
Phillips
Screwdriver
Attach left and right base
(1, 2)
to the base connector
(3)
using M6x10 bolts
(11)
.
Tighten with the 4mm Allen wrench
(12)
.
STEP 2
Assemble both of the Support Feet and Pads
(9)
using the M6x29 bolt
(21)
, M6 washer
(23)
, and nut
(28)
. Tighten using the Wrench
(12)
. Spin both of these onto the Base
Connector
(3)
by hand while using the washer
(24)
. When the Support Feet
(9)
are fully
seated, loosen it no more than a full turn to position them so they face backwards as
shown below. Then spin on the Rubber feet
(8)
onto the Right and Left Base
(1,2)
.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
110 lbs
(49.9 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
10 lbs
(4.54 kg)
CART
SHELF
10
3
2
1
12
x1
M4
12
x1
11
21
9
23
28
12
2x
12
8
24
3
2
1
9
