Vitus Audio MP-T201, Owner'S Manual, Page: 7 / 32

MP-T201 | Version 1
introduction
This amplifier
is VERY heavy!
Make sure to be
at least two people to
unpack the unit. You
might damage both
your back and the
amplifier if extra care
is not applied. Vitus
Audio A/S cannot
be held responsible
for any damage that
is a consequence of
uncareful handling of
the unit.

Unpacking the box
After you have opened the
top, it is possible to remove
the top protective foam which
gives you direct access to the
MP-T201.
In the top you will find the
remote, the power cord and
brochures.
Now remove the side
protective foam, this will make
it easier to grab hold of the
MP-T201.
Two people carefully lift the
MP-T201 out of the box, and
put it directly onto the floor.
Store the empty box and the
protective foam for later use.
F
120
100
80
60
40
- 40
20
- 20
0
C
50
40
30
- 20
20
10
- 10
- 40
- 30
0
F
120
100
80
60
40
- 40
20
- 20
0
C
50
40
30
- 20
20
10
- 10
- 40
- 30
0
 After unpacking
allow 24 hours
for the product to
reach room temperature
before connecting up
and switching on. This
is to allow condensation
to dissipate, which
might otherwise
cause damage to the
electronics. Remember
also that condensation
can form when you
move the amplifier from
a cold place to a warm
room.
CAUTION