
25
TROUBLE SHOOTING
If your humidifier is not working correctly please check the following causes:
PROTECTION OF THE ENVIRONMENT - DIRECTIVE 2012/19/EU
Discard the apparatus according to the European Directive on the Waste of Electrical and Electronic
Equipment (WEEE). For more information, contact the competent local authority for waste disposal.
TROUBLE
PROBABLE CAUSE
SULTION
Humidifier does not
operate.
Power cable not plugged in
Plug in power cable.
The power light is on, but
there is no mist with wind
No water in water tank
Fill tank with water
The water mist produces an
unpleasant smell.
New machine.
Open the water tank and
leave it for 12 hours at
shady and cool place.
Dirty water or the water is left in
the water tank for too long.
Clean the water tank and
change the water.
The power light is on, but
the humidifier doesn’t work
Too much water in the water
flume
Pour away some water
from the water flume
The output volume of the mist
is low
The transducer is dirty.
Clean transducer by a soft
brush
Water is too dirty or water kept too
long in the tank
Clean water tank and
change the water
Abnormal noise
Resonant in water tank when
water is too less
Fill water into water
tank
Unit is on an unstable surface
Move the unit to a
stable flat surface
Very tight tank cap
Over tightened
Add liquid soap to cap
gasket for ease opening