VITRIKO
Mobile Data Experts
1. CONFIGURATION OVER WEB BROWSER
1.19
NAT configuration
To enter the Network Address Translation configuration, select the
NAT
menu item. NAT
(Network address Translation / Port address Translation - PAT) is a method of adjusting the net-
work traffic through the router default transcript and/or destination IP addresses often change
the number of TCP/UDP port for walk-through IP packets. The window contains sixteen entries
for the definition of NAT rules.
Item
Description
Public Port
Public port
Private Port
Private port
Type
Protocol selection
Server IP address
IP address which will be forwarded incoming data
Table 33: NAT configuration
If necessary set more than sixteen rules for NAT rules, then is possible insert into start up
script following script:
iptables -t nat -A napt -p tcp --dport [PORT\_PUBLIC] -j DNAT --to-destination
[IPADDR]:[PORT1\_PRIVATE]
Concrete IP address
[IPADDR]
and ports numbers
[PORT_PUBLIC]
and
[PORT_PRIVATE]
are filled up into square bracket.
The following items are used to set the routing of all incoming traffic from the PPP to the
connected computer.
Item
Description
Send all remaining incoming
packets to default server
By checking this item and setting the Default Server item
it is possible to put the router into the mode in which all
incoming data from GPRS will be routed to the computer
with the defined IP address.
Default Server IP Address
Send all incoming packets to this IP addresses.
Table 34: Configuration of send all incoming packets
43
Contact www.vitriko.com [email protected]