02
03
Tel: +44 (0) 1253 789180
Tel: +44 (0) 1253 789180
Owner’s Safety and Operating Manual
Contents
Safety Instructions ...............................................3-4
Assembly & Operating Instructions ..........................5
Maintenance & Warranty ........................................6
Machine Specification..............................................7
Power Mixer Plus
Power Mixer Plus
Safety Instructions
PRODUCT DESCRIPTION
The machine has been designed to mix liquid and
powdery building materials such as paint, mortar,
adhesive, plaster and similar substances. The relevant
mixing action (which depends on the consistency of the
materials and the quantity that has to be mixed) must
be set up for the appropriate mixing tool.
Before operating the mixer, please read this operating
manual in full and take note of the safety precautions
detailed to prevent injuries and damages from
occurring.
This manual must be kept in a safe place so that the
information that it contains is always available. This
operating manual must accompany the mixer should
ownership transfer to someone else.
We do not accept any liability for accidents or damage
arising from failing to observe the safety precautions
detailed in this manual.
SAFETY INSTRUCTIONS
Read through these operating instructions carefully
before using the appliance. Become familiar with the
functions and method of operation. To ensure proper
operation, always maintain the appliance according
to the instructions. The operating instructions and
associated documents should always be kept close to
the appliance.
When using power tools, you must observe the following
basic safety precautions in order to ensure protection
from electric shocks, injury and fire. Read and follow all
the instructions before using this power tool.
Always check if your mains voltage corresponds with
the value on the type plate
The machine has been double-insulated in accordance
with EN60745: therefore, an earth wire is not necessary
USE CORRECT SUPPLY VOLTAGE:
The power supply voltage must match the information
quoted on the tools identification plate.
USE PROPER EXTENSION CORD:
Only use an approved extension cable that is suitable
for the machine’s power.
The cord must have a diameter of at least 1.5mm
2
.
When the extension cable is on a reel, unroll the cable
in its entirety.
SWITCH OFF THE MACHINE IMMEDIATELY IN CASE OF:
1. Malfunction in the mains plug, power cable or cable
damage.
2. Broken switch.
3. Smoke or strong smell of burning.
GENERAL SAFETY RULES
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power mixer.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause loss of control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
b) Avoid body contact with earthed surfaces, such as
pipes, radiators, ranges and refrigerators. There is an
increased risk of electric shock if your body becomes
earthed.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
