c) Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tool’s operation.
If damaged, have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. In accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations other than those intended could result
in a hazardous situation.
4
5) SERVICE
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
6) PRECAUTIONS WHEN USING THE LONG REACH SANDER
Attention!
You must abide by the following basic safety measures against electrical shocks,
injuries and the danger of fire when using electric tools. Read and abide by these instructions
before you start to use any tools. These instructions must be kept in a safe place.
- The equipment must never be used in surroundings where an explosive atmosphere exists.
- Do not let the cable touch any parts of your body.
- Only use the extension cable approved for use in the working area.
- Do not force the machine for unsuitable work, for example, rough sanding, brushing, etc.
- Only use identical replacement parts when servicing.
- The accessories’ allowed speed must be at least the same as the maximum speed of the
machine. Or else, they may be broken or cracked when their running speed is go over the
machine’s allowed speed.
- Do not use damaged accessories. Before use, always check whether the accessories
are nicked or cracked. For example, on the sanding pad, please check the support plate
is not cracked. Ensure everybody to be out of the machine’s rotation area and run the
machine at maximum speed for one minute, to fully test the accessories.
- Do not put down the machine when it has not stopped completely.
- Clean the exhaust port on the machine regularly. When working, control the machine firmly
with both hands to ensure safe operation.
- When sanding, use the correct size sanding disc. When choosing a sanding disc, please
observe the manufacturer’s specifications.
099502511-Long Reach Sander Owners manual_2017.indd 5
14/07/2017 11:10
