Make sure that the supplied rated voltage is AC 220V~240V before connecting
the water proof connector. Then turn on the power switch located at the buttom
of the product.
Connect the water supply hose and open the water ON/OFF valve.
Press the rear washing and female washing button at the side control together
for 3 seconds to fill up the water with water.(You will hear a beeping sound as
the water starts to fill up.When doing so, do not touch the seat or sit on the seat.
The beeping sound stops when the wateris properly filled up.
Touch the lower right part of the seat to check if the seat sensor works properly.
You will hear a beeping sound when the sensor works properly.
While still touching the seat, press rear washing button to check if the washing
function works properly.
Note:
make sure to cover the front of the nozzle so as not to be sprayed by the
water coming out from the nozzle.
Checklist before use
EN
35
Summary of Contents for V-Care 5674/431465
Page 50: ...www vitra vcare nl...
