45
FREQUENTLY ASKED QUESTIONS/ TROUBLESHOOTING
Question/problem - cause
Cause
Solution
The table saw does not switch on:
•
The power cord is unplugged or damaged;
•
ON/OFF switch contacts are not in good condition
or it does not work;
•
The thermal overload relay has tripped;
•
Plug in or repair the power cord;
•
Repair or replace the switch;
•
Activate the thermal overload relay
Miter gauge does not run smoothly:
•
The miter gauge was assembled incorrectly;
•
Rails are dirty or sticky;
•
Fixing screws are dirty;
•
Reinstall the miter gauge;
•
Clean and grease the rails;
•
Adjust the fixing screw;
The table saw is constantly burning the material:
•
The saw blade is damaged;
•
The material is being pushed too fast;
•
The rip fence is misaligned;
•
Replace the saw blade;
•
Push the material more slowly;
•
Align the rip fence;
It is difficult to turn the height adjustment handle:
•
Gears are clogged with dust;
•
Clean the gears and grease;
Poor cutting performance:
•
The saw blade is damaged or dirty;
•
The saw blade is not ideal for the intended task;
•
The saw blade is mounted upside down;
•
Clean and replace the saw blade;
•
Replace the saw blade with the correct one;
•
Reinstall the saw blade correctly;
Summary of Contents for Pro-Power VISCB20
Page 33: ...33 POWER TOOL DESCRIPTION AND PACKAGING CONTENT 2000W 315MM TABLE SAW VISCB20 ...
Page 62: ......
Page 63: ......
Page 64: ...VISCB20_REV01_NOV20 ...