background image

14

EN

g) Use the machine, accessories 

and tool bits etc. in accordance 

with these instructions, taking 

into account the working 

conditions and the work to be 

performed. 

Use of the power tool for 

operations different from those 

intended could result in a 

hazardous situation.

SERVICE

Have your machine serviced by a 

qualified repair person using only 

identical replacement parts. This 

will ensure that the safety of the 

machine is maintained.

ADDITIONAL SAFETY 

INSTRUCTION FOR LAWN 

MOWERS

If an extension cord is used make 

sure it is for outdoor use and 

marked as such.

The recommended size of extension 

cord is not lighter than 1.5 mm2 and 

a maximum of 10 meters in length.

Completely uncoil your extension 

cable before use to prevent 

overheating and loss of mower 

efficiency. When tidying away t he 

cable, wind it carefully to avoid 

kinking.

This appliance is not intended for 

use by persons (including children) 

with reduced physical, sensory 

or mental capabilities, or lack of 

experience and knowledge, unless 

they have been given supervision 

or instruction concerning use of the 

appliance by a person responsible 

for their safety. Children should be 

supervised to ensure that they do 

not play with the appliance.

WARNING: After switching off 

the machine, the cutting blade 

continues to rotate for a few more 

seconds.

Frequently inspect the condition of 

the cutting blade. Damaged blade 

must be replaced immediately. 

Blunt blade should be sharpened. 

Follow all the required precautions 

when replacing the blade.

Before use check the supply and 

extension cord for signs of damage 

or ageing. If the cord becomes 

damaged during use, disconnect the 

cord from the supply immediately.

DO NOT TOUCH THE CORD 

BEFORE DISCONNECTING 

THE SUPPLY

Not to connect a damaged cord to 

the supply or touch a damaged cord 

before it is disconnected from the 

supply. A damaged cord can lead to 

contact with live parts.

Do not use the mower if the cord is 

damaged or worn.

Read the instructions carefully. Be 

familiar with the controls and proper 

use of the equipment.

Keep ex tension cord away from 

cutting blades.

Wear eye and ear protection. Wear 

dust protection if the mowing 

action causes the raising of dust or 

particles.

Use the mower only in day light or 

good artificial light.

When starting up and when the 

machine is in operation, keep the 

cutting section away from all parts 

of the body, especially the hands 

and feet.

Thoroughly inspect the mower for 

loose or damaged parts before 

each use. Do not use the unit until 

adjustments or repairs are made.

Use only the manufacturer’s 

recommended replacement parts 

and accessories.

Always disconnect the mower 

from the mains when leaving it 

unattended.

Switch the motor off and pull out 

the plug when the machine is not 

being used, being cleaned, being 

moved from one place to another or 

when the blade is being changed or 

adjusted.

If there is an interruption to the 

power supply or the extension cable 

is damaged, switch of f the machine 

immediately and remove the plug 

from the power point.

Check that all grass cuttings and 

dirt have been removed from the 

ventilation vents.

When not in use, store the mower 

out of the reach of children and 

infirm people.

WARNING: Always stop the 

mower and switch off at the mains 

when cutting is delayed, emptying 

the grass box or when walking from 

one cutting location to another.

Do not cross roads or gravel paths 

with the machine still running.

Do not move the machine by pulling 

on the electrical cable. Always use 

the handgrip.

Keep a balanced and stable stance 

while using the machine.

Ensure that the area being cut is 

free from strings, stones and debris. 

Remove any objects that could be 

thrown during cutting or could wind 

around the cutting mechanism. 

If you hit or become en tangled with 

a foreign object, stop the motor 

and disconnect from the main s 

immediately to check for damage. 

Repair any damage before further 

operation is attempted.

Do not cut against hard objects. 

This could cause injury to the 

operator and damage to the 

machine.

Keep your hands, face and feet 

away from all moving parts. If 

possible, avoid cutting wet grass.

Exercise proper precaution when 

mowing on sloping ground. Watch 

your footing and wear non-slip 

footwear. Mow along the slope not 

up and down it. Do not mow on 

steep slopes. Be especially cautious 

when changing direction on slopes 

stand above the mower to avoid risk 

of injury.

Never operate the mower barefoot 

or when wearing open sandals or 

canvas shoes.

Do not mow by pulling the machine 

towards you.

When mowing, keep the cable away 

from the mower. Your direction 

of work should be away from the 

Summary of Contents for VIMR1800

























Reviews: