Instructions for Use
69
7.7.4
Test Result Options and Banding
Once the final test result value has been calculated by the Lu-mini Unit, there
are two further steps that determine how the result is displayed on the unit.
The first set of options control how the displayed result is formatted:
Result DPs
Number of decimal-places displayed (0 to 3)
Result Units
Units of measurement (e.g. RLUs)
The
Result DPs
is intended to be used in conjunction with the
Scaling
Factor
(Section 7.7.1) to convert a reading to specific
Result Units
of
measurement.
The second set of options control how the result is qualified:
Lock Status
Prevent user from changing pre-assigned Status value
Result Banding
Qualify result using individual Banding limits
Limit Result
Limit result value to within overall Banding limits
Comparison Bands
Qualify multi-tube result using comparison Banding
Show Relative
Show comparison result as relative percentage
If enabled,
Result Banding
is applied to all
Sample Method
types (Section
7.7.2): individual
Single Sample
or
Control Only
samples; or multi-tube
C Samples
.
However,
Comparison Bands
only relate to the
C Sample
method.
Summary of Contents for Lu-Mini
Page 1: ...Instructions for Use...
Page 85: ...Instructions for Use 85 Notes...
