ViTiny UM08-GN, User Manual

Page: 25 / 40

23
1.5 Microscope introduction:
1.5.1 IR Remote Area/Indicator
When both ○
g
and ○
h
LED indicator blinks, the
microscope is in standby mode.
Caution: Please remove the transparent protection sheet
on the IR receiver area.
(1) IR remote control aiming area
○
f :
The indicator will blink
whenever buttons are pressed. If the indicator did not blink
means the signal was not delivered and please repress again
.
(2) HDMI indicator ○
g
：
When lit up, the microscope is in HDMI
mode. If light blinks, means microscope does not connect with
monitor.
(3) Remote control indicator
○
h
:
The indicator will lit up when
○
g
○
h
○
f