11
Battery capacity display
4 green LED lights are constantly burning between 75% -100%.
3 green LED lights are constantly burning between 50% -75%.
2 green LED lights constantly burns between 25% -50%
1 green LED lights constantly burning lower than 25%
If no LED lights come on, even after pressing the indicator button, the battery is
defective and needs to be replaced.
For safety reasons, the capacity of the battery can only be checked when the
machine has come to a complete stop.
N
OTE:
Batteries may become warm while charging. This is normal. If the battery
is hot after continuous use in the tool, allow it to cool down to room temperature
before charging. This will extend the life of your batteries.
W
ARNING
: Always disconnect the battery pack from the tool before any
assembly, adjustments or changing accessories.
Fitting And Removing The Battery Pack
(Not Supplied)
To insert the battery pack, place it on the guide track and push it into the housing. It
will audibly snap in.
To remove the battery pack, just press the release button (a) and pull it out.
