5
BEFORE FIRST USE
Before use, check all accessories are complete and that the equipment is not
damaged. The Multi Chopper & Blender should be cleaned according to the
instructions in the Cleaning and Maintenance section. The Multi Chopper & Blender
should be run through an operational cycle before it is used for the first time.
When using the Multi Chopper & Blender for the first time a slight odour may be
emitted. This is normal and will soon subside.
NOTE:
Care should be taken when handling the sharp cutting blades,
emptying the bowl and during cleaning.
Instructions
1.
Always ensure meat and vegetables are cleaned and prepared thoroughly
before placing them into the unit. Remove any bones or skin from meat.
For any frozen meat or vegetables, make sure these are defrosted before
using the unit.
2.
Fix the upper blade along the groove of the lower blade.
3.
Fix the blade on the spindle, then hold the cutter bar with the hand revolving
to check whether the rotation and set up as correct. Please refer to below
picture:
4.
Place the prepared vegetables or meat into the glass bowl:
6
5.
Put the bowl cover on top of the glass bowl:
6.
Place the motor unit onto the bowl cover and plug in the unit. Press down on
the power switch for 20 seconds to achieve the ideal consistency. If 20
seconds is not enough, loosen the motor unit and try again.
7.
When the chopping and stirring has finished, turn off the power and make
sure the blades have stopped. Remove the motor unit, bowl cover and blades,
then pour out the meat and vegetables.
8.
When the unit is not in use, it should be stored safety: turn the unit off, unplug
the power cord from the outlet and store the unit in a cool dry place.
