PRECAUTIONARY MEASURES
Firstly opening the sucks in the air, to check if the suction pipe or hose
somewhere inside are blocked, you should switch off the vacuum cleaner at
once if such things happened. First clear the blocked substance before you
attempt to start the vacuum cleaner again.
This vacuum cleaner is equipped with a plug and a cable which rolls up
automatically. If anything gets damaged,both the plug and the cable must be
repaired by a qualified repairman or electrician.
ASSEMBLING VACUUM CLEANER
Always remove the plug from the power socket before fitting or
removing accessories!
1. Equipping vacuum cleaner
a. Fixing the flexible hose on vacuum machine:
Insert hose joint into the air intake duct on the front of appliance. Press until
it clicks into position.
** Removing the flexible hose from vacuum machine:
Removing the plug from the power socket. Press release button on hose joint
to remove the flexible hose from the vacuum machine.
2. Fixing the extension tubes and accessories
a. Fixing the telescopic tube to the handle.
b. Fixing the brush to the extension tube.
c. Fixing Floor brush
Ideal for the daily cleaning on carpets and hard floors.
P/3
P/4
1. Do not operate the vacuum cleaner
too close to heaters like radiators,
cigarette bud etc.
2. Before you insert the plug into
the wall contact, make sure
your hand is dry.
3. Before you start using the vacuum
cleaner, please remove large or
sharp objects from the floor in
order to prevent the vacuum is
damaged.
4. When you want to pull the plug from
the wall contact, please do this at
the plug itself and not by means of
the electrical cable.