-
-
-
- 8
8
8
8 -
-
-
-
all meet the government requirement for RF exposure. For body-worn operation,
the phone meets FCC RF exposure guidelines provided that it is used
with
accessories that contain no metallic components in its construction and provides a
separation of at least 1.5 cm from the body. Use of other accessories may not
ensure compliance with FCC RF exposure guidelines.
Measurement of radio frequency exposed (absorbed special
rate information SAR)
This mobile phone is a transmitter-receiver with the low-output electric wave.
The mobile phone conforms to mandatory requirements of EU standard
related with radio wavelength exposed,
This product is designed and manufactured, kept from exceeding the exposed
range of radio frequency energy as EU council has recommended.
The international standard value is developed on the basis of thorough and
regular scientific researches and evaluation (examination) by an independent
research institute.
The range standard is to search for safety of all regardless of age or health
state.
Standard value exposed of the mobile phone is displayed in “Specific
Absorption Rate” (SAR) unit.
The SAR range (limit) that EU council recommends is 2.0w/kg.
Based on the mobile functions, SAR test will be performed, and then the
mobile sends the maximum output at the certified frequency. Its maximum
output will be measured in SAR, but the level of the usual SAR will be far less
than the maximum value. It is because the mobile phone is designed to
-
-
-
- 36
36
36
36 -
-
-
-
Nevertheless, the device should be used in such a manner that the potential for
human contact with the antenna during normal operation is minimized.
