2
3
Layout:
1. Video Input / 12VDC Power Output
2. Power Button / Video Input Selection
3. 5VDC Power Input (Mini USB)
4. Charge LED
5. CoC (Control over Coax)
Operation:
1. Remove Test monitor from packaging
2. Connect supplied charging cable to test monitor (right side)
and plug-in transformer to charge the battery the Blue LED
will illuminate when monitor is charging
3. After battery is charged connect the test lead to the top of the
test monitor
4. Connect TVI/AHD camera to the RED connector on test lead
or Analog camera to the YELLOW lead
5. Slide switch on right side of test monitor to HD for TVI/AHD
cameras or CVBS for Analog cameras
6. To power camera via the test monitor use the power adaptor
on the test lead (12VDC 800mA MAX)
7. If camera has CoC (Control over Coax) press Menu button
to access the OSD of camera and use arrow buttons to
navigate through OSD
Summary of Contents for VTM-LCD43-5A4
Page 2: ...2 1 2 3 4 5...
