background image

VITEK

VITEK

 VTC-TNB36R3V2

VTC-TNB42R3F2

VTC-TNB42R4F2

3.0 & 4.0 Megapixel Indoor/Outdoor 

WDR IP IR Bullet Cameras

QUICK START GUIDE

FEATURES

• 1/3” Megapixel Progressive Scan CMOS image sensor
• Up to 30fps live view
• 3.3~12mm Varifocal Lens (VTC-TNB36R3V2) / 3.6mm Fixed 

Iris Lens, 2.8mm Also Available (VTC-TNB42R3F2 & VTC-

TNB42R4F2)

• 36 Infrared LED’s with 120’ IR Range  (VTC-TNB36R3V2) / 42 

Infrared LED’s with 150’ IR Range  (VTC-TNB42R3F2 & VTC-

TNB42R4F2)

• 120dB Super Wide Dynamic Range (WDR)
• True Mechanical Day/Night function by ICR
• XD-DNR (2D-DNR & 3D-DNR) Noise Reduction 
• On Board Motion Detection
• H.265/H.264/MJPEG Triple Streaming
• Secondary Video Output (CVBS)
• Remote Viewing via CMS, Internet Explorer, and iOS & Android 

Apps

• Minimal Latency with up to 10 simultaneous user connections
• ONVIF Compliant
• IP66 Weather Resistance
• Optional Junction Box Mount Available (VT-TJB01)
• 12VDC & PoE (Power over Ethernet) Operation

PLEASE NOTE: 

Complete User Guide, Software, Tools, and Updates are 

available online.  Scan the QR Code or visit:

http://www.vitekcctv.com/Downloads

Summary of Contents for VTC-TNB36R3V2









Reviews: