2
PIR BOARD LAYOUT
1. LED:
When an intrusion is detected, the LED will activate.
2. JP1:
Pulse count setting.
1-2 short:
Relay will activate when an intrusion is detected once. (For stable
environments or high risk operating environments)
2-3 short:
Relay will activate when an intrusion is detected twice within 15 seconds.
(For harsh environments)
3. JP2:
Relay output select.
Short:
For outer control used in area where DC12V is requested (Limited at 200mA).
Normal:
N.C. = DC12V out
Activate:
N.O. = DC12V out
Open:
Normal relay connector (1.5A at DC24V/1.5A at AC120V/1A at AC240V)
Normal:
C & N.C. short / C & N.O. open.
Activate:
C & N.C. open / C & N.O. short.
Caution! Risk of electric shock. Set-up and operation should be
performed by authorized service person only.
4. VR1:
Sensitivity adjustment.
Turn clockwise for high sensitivity, turn counter-clockwise for low.
5. VR2:
Relay activation time adjustment (range about 2 ~ 30 seconds).
Turn clockwise for short time, turn counter-clockwise for long.
6. NC/C/NO Wiring:
C:
BLACK
NO:
WHITE
NC:
RED
CN1 Connector:
1. DC 12V IN
2. GND
3. AUDIO OUT (option)
4. GND
5. VIDEO OUT
6. RELAY C. (common)
7. RELAY N.O. (normal open)
8. RELAY N.C. (normal close)
CN2 Connector:
1. AUDIO IN (Not Available In US)
2. VIDEO IN (from CCD MODULE)
3. GND
4. DC 12V/500mA OUT (for CCD MODULE)
B
BL
LA
AC
CK
K
3
Image Device
Effective Pixels
Resolution
Minimum Illumination
PIR Detection Range
PIR Alarm Output
AGC
S/N Ratio
Video Output
Auto Electronic Shutter
Standard Pinhole Lens
Power Source
Power Consumption
Operation Temperature
Humidity
Dimensions (WxHxD)
1/3” B/W CCD
1/3” Color CCD
510 x 492
537 x 505
420 TV Lines
380 TV Lines
0.3 Lux / F1.2
1.0 Lux / F1.2
100° / 35' x 35' Coverage Area
NC/N/NO
>18db
More Than 48dB
Composite: 1.0 Vp-p / 75 Ohm
1/60 to 1/100,000 sec.
3.8mm / F2.0
12VDC (200mA Regulated)
12VDC (300mA Regulated)
1.2W
14
˚F
~ 140
˚F
(-10
˚C
~ 60
˚C)
0-95%
2.75” x 4.72” x 1.69” / 70mm x 120mm x 43mm
VTC-PIRB2
VTC-PIRC2
SPECIFICATIONS
Use a professional CCTV monitor only to achieve best resolution
and performance.
Camera may also be connected to other devices such as a VCR or
Digital Recorder.
Use copper braid RG59U coax for best video performance.
Video may also be transmitted via CAT5E cable with the use of
video baluns model VT-TR1M.
**12VDC Regulated power adapter 12V must be used otherwise
the device will be damaged and un-repairable.
