ULTRA CLEAR RESOLUTION CAMERA
Operating Instructions
23
LENS SHADE COMP SETUP
PATTERN
POSH
POSV
246
RETURN
SET1
480
This function is used to caculate the compensation data for lens shading.
Convex shape of the lens causes the light to enter the camera unevenly and typically
makes the center of the screen brighter than the rest. It is used to compensate for
this undesirable effect and make the screen more even.
Set to ‘ON’, you can adjust the shading PATTERN and POSITION.
This function is used to carry out defog function. Sets LEVEL to eliminate amount
of fog on screen.
If the DEFOG is set to ON, the WDR/BLC function will be deactivated.
This function is used to remove the flickering on screen due to differences in light
and electric frequencies.
Selects AUTO, OFF or ON.
1-8. LENS SHD COMP
(default: OFF)
1-9. DEFOG
(default: ON)
1-10. FLK LESS
(default: AUTO)
This mode can minimize the problems related to color rolling caused by differences
between the flicker of fluorescent lights and the frequency of the camera.
Selects AUTO, OFF or ON
1-11. ANTI-CR
(default: AUTO)
22
