Installation Instructions
Pan & Tilt adjustments
1) Pan limit:
Pan is limited to +/- 90°.
2) Tilt limit:
Tilt is limited to 0°(2°) min ~ 90° max.
for wall(ceiling) installation respectively
with reference to the wall(ceiling) when
the inclination of camera module is 0°,
that is, the image is aligned horizontally.
• Unlock the screw on the camera bracket using the torque wrench supplied
• Set the camera’s viewing angle then lock the screw on the bracket.
90°
90°
80°
90°
• on the wall
• on the ceiling
3) Inclination limit
(Horizontal image alignment):
Inclination limited to +/-90° max.
±90°
Torque
wrench
Lock/Unlock
Screw
■ Adjustment of viewing angle
with one-touch 3-Axis bracket
Zoom & Focus adjustments
(VTC-IR403-550NP Only)
• Turn the Focus gear to “N”(Near) or “∞”(Far)
until the sharpest focus is made.
• To widen the viewing angle, turn the Zoom to
“W”(Wide) and to obtain a closer view, turn it
to “T”(Tele)
Use the torque wrench supplied.
6
7
