FEATURES:
• 1/2.9” Sony® CMOS
• 2.1 MegaPixel With full 1080p/720p HD-SDI Output
(SMPTE 292M)
• MegaPixel IR Corrected 3-9mm (VTC-HOCRAZ39)
/9-22mm (VTC-HOCRAZ922) Varifocal Lens
• Mechanical IR Cut Filter (True Day/Night)
• 16:9 Video format
• On-board Intelligence (OBI Technology) delivers Auto-
Focus-Zoom by tracking motion, then optically zooming in
to that area of the frame
• Fully programmable advanced WDR
• Two (2) High Power 850nm IR LEDs with up to 80’ foot
range
• Integrated Cooling Fan
• Advanced OSD Functions: Motion Activated Pointing
Zoom, Defog, Dynamic IR, BLC/HLC, Motion Deblur, Pixel
Defect Compensation, Title Set, Mirror, Flip
• 100% Pure Digital Transmission of video data
• Up to 700’ HD Transmission Range (Depending on cable
characteristics and integrity)
• Heavy Duty IP68 rated weather/
vandal resistant aluminum construction
• 12VDC / 24VAC Dual Voltage
Operation
VTC-HOCRAZ39/922
2.1MP HD-SDI Compact Indoor/Outdoor
WDR True Day/Night Dome Camera
VITEK
Torque Wrench: 3mm (1pc)
Mounting Screw:
4 x 30mm (4pcs)
Plastic Anchor:
6 x 30mm (4pcs)
Mounting Template
HD-SDI Dome Camera
Package Includes
Safety Precaution
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To prevent electric shocks and risk of fire hazards, do NOT use other than
specific power source.
Warning
:
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment . This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Caution
:
Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
Mains power quality should be that of a typical commercial environment. If the user
of the model requires continued operation during power mains interruptions, it is
recommended that the model be powered from an uninterruptible power supply
(UPS) or a battery.
The symbol is intended to alert the user to the presence of important
operating and maintenance(servicing) instructions in the literature
accompanying the unit.
The symbol is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons .
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Safety Precaution
NOTICE
The image used in this instruction manual are processed to help comprehension
and may differ from actual video of the camera.
Never open the device such as boards or lens.
The warranty becomes void if repairs are undertaken by unauthorized persons.
Maintenance and repair have to be carried out only by authorized service centers.
Use only a mild detergent to clean the housing.
The camera should never be operated beyond the technical specifications.
The camera should never be operated in water.
Avoid installing in areas where shock or vibration may occur.
Pay attention to safety when installing the connection cable and observe that the
cable is not subjected to heavy loads, kinks or damage and no moisture can get in.
This can lead to damage to the camera and void the warranty.
Complete Installation and Operation Instructions can be
found on Included CD.
General Operation
Instructions
Complete Installation and
Operation Instructions on CD
Video Sub-Out Cable (1pc)
2
3
4
Optional Dome Mounts to Suit any Application!
