Operating Instructions
Power Supply Connections
OSD Control
Joystick
Using OSD Controller
Setup menu can be accessed and controlled by the OSD control joystick on the
rear of the camera unit. Five commands are available with the joystick.
The design of the OSD could be different according to the Model.
Camera can work with either 12VDC or 24VAC, dual voltage power.
Primary and secondary grounds are completely isolated to avoid possible
ground-loop problems.
1) SET (●) : Access to the menu or enter the setting.
To enter the main menu, press the Set Key down.
2) UP/DOWN (▲/▼) : Choose the desired sub-menu and to move the
cursor up or down.
3) LEFT/RIGHT (◄/►) : Set the value of the selected menu. Used to
adjust the desired menu selection and to move the cursor left or right.
Description of the OSD control operation
4) ‘
’
denotes long press down for about 2 seconds
HD-A
CVBS
CONTROL
POWER
Please set the Video format selection Switch to “HD-A” when CVBS is
no longer used after finalizing camera installation.
This will allow th e WDR and 3D-NR to function when using
HD-SDI/EX-SDI.
8
9