Operating Instructions
• POP ON FOCUS (OFF) :
ON zooms in the center of picture at 2X for better focusing.
• FOCUSING STATUS (ON) : Shows how focus is set. When blue bar
doesn’t show up, try the lens focus NEAR and FAR. The maximum blue bar
indicates the best focusing position.
4-1. NORMAL
(default)
4-2. WDR
4-3. D-WDR
4. SCENE ENHANCE
: Optimized for normal indoor and outdoor in good lighting condition.
: Improves the visibility for bright areas and dark areas by double
capture of image with LONG and SHORT exposures. WDR level can be
selected from LOW, MID and HIGH. Care should be taken to select this mode
because video may lose its quality in some environments by over compensation.
※
CVBS video signal:Connecting 2nd video to CVBS port disables WDR function
temporary. It should be considered when installer adjusts the video with
installation monitor via CVBS video signal.
: Improves the visibility by compensating the video gain for the dark area.
Noise can increase in the dark area accordingly.
3D-NR is a very sophisticated and powerful time-based noise reduction technology
by monitoring the noise for several video frames and defining and eliminating
them consecutively at low light. Higher setting reduces more noise but results in
losing the sharpness and tail effects or motion blur may occur.
4-4. BLC
4-5. HLC
5. 3D-NR
: Cuts out the bright area with a black mask and excludes it from compensation.
Lower HLC LEVEL cuts out video from lower light levels (more sensative).
: Improves the visibility for dark objects caused by bright back light.
Outside area of BLC window can over saturate.
BLC has a target window for compensation and its size and position can be set
by H-POS, V-POS, H-SIZE and V-SIZE.
16
17
