Vitek VT1450 PR, Manual Instruction, Page: 7 / 36

from fruits and bones from meatm, as
these can harm the blades.
14. Don't allow the blender to sit for too
long after use, as the food will dry on
the blades making it very difficult to
clean. If you can't clean the blender
straight away, pour some warm water in
it and allow to soak.
15. Do not process hot liquids in your
blender. Allow them to cool before pro-
cessing.
16. Always ventilate the blender jug when
pureeing warm Ingredients. This is
achieved by lifting the measuring cup
out
of the lid.
A guide to your Multi Blender
Note: Processing times will vary with the
quantity in the blender jug; these times
are only a guide.
Care and Cleaning
Quick cleaning method.
Half fill the blender with warm water and
a small amount of detergent. Press the
PULSE button for a few seconds. Then
remove the jug and rinse it under running
water.
For thorough cleaning.
Unscrew the blade system from the jug by
turning anti-clockwise. Remove the sili-
cone rubber seal from the blade assem-
bly. Wash the lid, jug, silicone rubber seal
and the blade assembly in warm, soapy
water.
Caution: Take care when cleaning the
blades, as they are extremely sharp.
To clean the motor base.
Use a damp, soft sponge with mild deter-
gent and wipe over the motor base.
Note: Never immerse the motor base in
water.
Note: Do not place any parts of the blend-
er in a dishwasher.
Specifications
Power requirements 230V ~ 50Hz
Max. power 530 W
Blender 1,5 L.
The manufacturer reserves the right to
change the specifications without warning.
The unit is designed to last for no less
than 3 years under normal conditions
Guarantee
Details regarding guarantee conditions
can be obtained from the dealer from
whom the appliance was purchased. The
bill of sale or receipt must be produced
when making any claim under the terms
of this guarantee.
This product conforms to the
EMC-Requirements as laid
down by the Council Directive
89/336/EEC and to the Low
Voltage Regulation (73/23 EEC)
7
ENGLISH
1450_new.indd 7 1450_new.indd 7 30.10.2008 16:10:20 30.10.2008 16:10:20