Vitek VT-IPSD102H -, Manual

Page: 14 / 55

VT-IPSD102H Manual
-13-
6. Checking Operating
Once the power is supplied to the camera, it will start booting. The system will boot up to an operating
mode after approximately 40-60 seconds. The green LED on the Ethernet port will flash indicating the
system is ready.
Software provided on the disc called ENVI VMS allows you to check the IP address and other network
details of the camera.

Encoder LED Display
The above LED status display shows that neither camera or decoder are connected. Once the
encoder is connected to a decoder, the color of link LED will light in green and the LED will blink as
video or audio transmissions occur.

Decoder LED Display
The above LED status display shows that the encoder has started without connecting to an encoder.
Once an encoder is connected, the color of link LED will be changed to green and the LED will blink
as video or audio data transmissions occur.
PWR STATUS LINK
Red Green
Blinking
DATA
OFF
PWR STATUS LINK DATA
OFF
Red
Green
Blinking
OFF
Red
Blinking