47
DISK MANAGEMENT
SYSTEM
SYSTEM
To manage the internal hard drives, highlight DISK MANAGE and press
ENTER
.
RECORD TIME LIMIT
: In certain circumstances, it may be necessary to limit the amount of footage stored.
on the DVR (to comply with data protection laws for example).
Recording can be limited to 12 hours, 1 day, 2 days, 3 days, 1 week or one month. Once the DVR has
this amount of footage stored, it will start to overwrite the earliest recorded footage.
OVERWRITE
: When set ON, the DVR will start overwriting the earliest recorded footage once the hard
drive becomes full. In this case, the percentage of hard drive used shown in live display will
always be 99%. When set to OFF, the DVR will stop recording when the disk becomes full.
FORMAT
: If necessary, all footage can be erased from the DVR using this option
Please note: When RECORD TIME LIMIT is set, the percentage of HDD used shown in live
display mode may never reach 99%.
For example, if the total HDD capacity of the DVR allows for a recording time of
4 days under normal operation, if the RECORD TIME LIMIT is set to 2 days, the
percentage of HDD used will never exceed 50%.
Please note: When a RECORD TIME LIMIT is set, the OVERWRITE option cannot be changed.
To setup the various event handling options,
highlight EVENT/SENSOR and press
ENTER
.
Click the
EVENT / SENSOR
menu.
Click the
DISK MANAGE
menu and click the each
value.
Then click the ON/OFF value by the button.
And click the
START
menu for the Format.
