REMOTE CONTROL FUNCTIONS
1. Power On/Off
Power On/Off Button. Power Off is indicated by RED and On status is indicated by
GREEN. To turn the system on, press the Power key. The key should turn amber.
Enter the password (default is 1111) and press the power key again. The key should
turn green and the system should become active. To turn the system off, repeat the
above step.
2. Event Log Display
User can select the Event Log to be displayed or not. When the log is displayed,
user can select an event with the directional keys and when the ENTER button is
pressed, the system will playback that selected event. NOTE: Event log is only
possible when The system is set to “Event Recording.”
3. OSD (On Screen Display) On/Off
4. M/D (motion detection) Area Display On/Off
5. Network Status
Indicates the network status of the system. If there is an unwanted network intrusion,
user can manually disconnect the network
6. Sensor Off
User can turn off the four Sensors connected to the system.
7. Alarm On /Off
User can activate or deactivate the alarm connected to the system.
8. Video Screen Selector
•
button: Single Screen Mode.
•
button: Multi Screen Mode
10