4
ENGLISH
BEFORE THE FIRST USE
After the unit transportation or storage at low tem-
perature, keep it for at least three hours at room
temperature before switching on.
– Unpack the unit completely and remove any adver-
tising stickers that can prevent the unit operation.
– Check the unit for damages; do not use it in case
of damages.
– Before switching on make sure that the operating
voltage of the power adapter (21) corresponds to
voltage of your mains.
– The power adapter is intended for operation with AC
system and 50 Hz or 60 Hz frequency, the unit does
not need any additional settings for operating with
the required nominal frequency.
SWITCHING ON
– Place the unit horizontally (pic. 1), holding by the
handle (8), turn the lid (6) clockwise to the position
« » and remove the lid.
– Remove the filter (5) from the unit body (pic. 2).
– Remove the filter (5) from the packaging mate-
rial (pic. 3).
– Install the filter (5) into the unit body (pic. 4).
– Install the lid (6) and turn it counterclockwise to the
position « » (pic. 5).
– Place the unit on a flat steady and dry surface. The
distance to the air inlet grids (3) must be at least
30 cm, do not block the air inlet grids (3) with for-
eign objects.
– Connect the power adapter (21) cord to the socket
(4) on the bottom part of the air purifier and con-
nect the power adapter (21) to the mains socket.
You will hear a sound signal and the on/off button
(10) « » will light up.
Note: - the control panel (1) buttons are sensory, you
just need to touch the button to switch the neces-
sary operation mode on, every touch of the buttons is
accompanied by a sound signal.
– Switch the unit on, by pressing the on/off button
(10) « », the airflow first speed will switch on and
the indicator (14) will light up.
– To select speed operation modes, press the button
(11) “Speed”, the airflow speed will change. The
indicators (14) on the control panel (1) will show the
operation modes.
– To switch the unit off, press and hold the on/off but-
ton (10) « » for 3 seconds. The air purifier will switch
off, and then you can unplug the power adapter (21).
– The air purifier can operate for a long time, but you
have to follow the safety regulations as during any
other electric appliance operation: unplug the unit
when you don’t need to use it.
Switching the timer on/off
– To set the unit operation time, repeatedly press the
button (12) “Timer”, the indicators (13) will show the
preset operation time “1H-2H-4H-8H”.
– To switch the timer off press the button (12) “Timer”
repeatedly until all the indicators (13) go out.
Switching the night mode on/off
– To switch the night mode on, press the button (17)
“Sleep”, the indicator (18) will light up.
– In the night mode only the on/off button (10) « »
illumination and the indicator (18) will glow, the unit
will be operating at low airflow speed. You can also
set the unit timer operation time.
– If you press any button in the night mode to switch
the indication on and don’t perform any actions
for 5 seconds, the unit will switch back to the night
mode.
– To switch the night mode off, press the button (17)
“Sleep” again, the indicator (18) will go out.
Automatic operation mode
– To switch the automatic operation mode on, press
the button (19) “AUTO”, the indicator (20) will light up.
– In the automatic mode the airflow speed will be set
automatically.
– To switch the automatic mode off, press the but-
ton (19) “AUTO” again, the indicator (20) will go out.
Air quality light indicator
The light indicator (22) changes its color depending on
the current air quality in the room:
Green – good air quality;
Yellow – medium air quality;
Red – bad air quality.
Child safety lock
– To switch the child safety lock on, simultaneously
press and hold for 3 seconds the buttons (12) “Timer”
and (19) “AUTO”. You will hear a sound signal, and all
the control panel (1) buttons will be locked.
– To switch the child safety lock off, simultaneously
press and hold for 3 seconds the buttons (12)
“Timer” and (19) “AUTO”. You will hear a sound
signal, and all the control panel (1) buttons will be
unlocked.
Note: - when you press any button with the child safety
lock on, you will hear 3 sound signals, and the unit will
not respond to any actions.
Replacing the filter
– The filter (5) used in the unit is intended for approxi-
mately 2000 hours of operation, the indicator (15)
glows white. During the first switching on and when
you switch the unit on afterwards, the remaining oper-
ation time timer will be switched on. If the filter usage
time drops to 10%, the indicator (15) will light up and
flash red, in this case it is necessary to clean the filter
(5) (see the chapter “Cleaning the filter (5)”).
CLEANING THE UNIT
– Before cleaning switch the unit off, disconnect
the power adapter (21) from the mains, disconnect
the power adapter (21) cord jack from the socket
(4) on the bottom part of the unit body.
– Regularly clean the grids (3) on the bottom part
of the body (2) and the upper grid (2). You can
