Vitek VT-8553 Manual Instruction Download Page 4

Page: 4 / 20

ENGLISH

THIS UNIT IS INTENDED FOR HOUSEHOLD
USE ONLY. ITS COMMERCIAL USAGE AND
USAGE IN PRODUCTION AREAS AND WORK
SPACES IS PROHIBITED.

BEFORE THE FIRST USE
After the unit transportation or storage at
low temperature keep it for at least three
hours at room temperature before switch-
ing on.

–

Unpack the unit completely and remove any
promo-stickers that can prevent the unit
operation.

–

Check the unit for damages; in case of dam-
ages, do not use the unit.

–

Before switching on, make sure that the
operating voltage of the unit corresponds to
the voltage of your mains.

SWITCHING ON

–

Place the unit horizontally, turn the base (5)
counterclockwise « » and remove it (pic. 1).

–

Remove the filter (10) from the unit body
(3) (pic. 1).

–

Remove the filter (10) from the packaging
materials.

–

Install the filter (10) into the unit body (3)
(pic. 1).

–

Install the base (5) and turn it clockwise until
bumping « » (pic. 1).

–

Place the unit on a flat steady and dry sur-
face.

–

Connect  the  power  plug  to  the  mains
socket, you will hear a sound signal and the
operation  mode  indicators  (6,  8)  and  the
illumination  will  light  up.  After  3  seconds
the unit will switch to the standby mode, the
operation mode indicators and the illumina-
tion will go out.

–

Switch the unit on by pressing the on/off
button (9) «

», the power indicator (8) will

light up. The illumination will light up and the
second airflow speed will switch on with the
corresponding indicator (6).

Note:

–

the operation mode buttons on the control
panel (1) are touch-sensitive, you need only
to touch the button to switch the necessary
operation mode on.

–

To select the desired airflow speed of the
fan consequently press the button (7) «

»,

the airflow speed will change in a 2-3-1
sequence.

Notes:

–

when you switch the unit on, the built-in air
ionizer will switch on automatically.

–

the illumination will automatically switch off
when the unit switches to the first airflow
speed of the fan.

Note: - the HEPA filter (10) service life
depends on the filtered air. Using the air puri-
fier in a humid place will significantly reduce
the filter service life.

–

To switch the unit off press the on/off
button (9) «

». The unit will be switched

off, switch to the standby mode and the
indicators will go out, after that unplug
the unit.

–

The air purifier can operate for a long time,
but you have to follow the safety regula-
tions as during any other electric appliance
operation: unplug the unit when you don’t
need to use it.

CLEANING THE UNIT

–

You can clean the HEPA filter with a soft
brush or a vacuum cleaner.

Caution!

–

Do not wash the HEPA filter. It must be
replaced after 3-6 months depending on
the air quality.

–

Regularly clean the grid (4) on the bottom
part of the unit body and the upper grid (2).
You can clean them with a household vac-
uum cleaner.

–

Wipe the unit body (3) with a slightly damp
cloth, and then wipe it dry.

–

Never immerse the unit into water or other
liquids.