4
ENGLISH
responsible for their safety or if they are
not instructed by this person on the usage
of the unit.
•
For children safety reasons do not leave
polyethylene bags used as a packaging
unattended.
Attention!
Do not allow children to play
with polyethylene bags or packaging film.
Danger of suffocation!
•
Periodically check the power cord and the
plug: they should not be damaged.
•
Do not use the unit if the motor unit body,
the power cord or the plug is damaged, if
the unit works improperly or after it was
dropped.
•
Do not attempt to repair the unit. Do not
disassemble the unit by yourself, if any
malfunction is detected or after it was
dropped, unplug the unit and apply to any
authorized service center from the con-
tact address list given in the warranty cer-
tificate and on the website www.vitek.ru.
•
To avoid damages, transport the unit in
the original package only.
•
Keep the unit out of reach of children and
disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD
USE ONLY, ITS COMMERCIAL USAGE AND
USAGE IN PRODUCTION AREAS AND WORK
SPACES IS PROHIBITED.
BEFORE THE FIRST USE
After unit transportation or storage
at low temperature keep it for at least
three hours at room temperature before
switching on
.
•
Unpack the unit completely and remove
any promo-stickers that can prevent the
unit operation.
•
Check the unit for damages, do not use it
in case of damages.
•
Before switching the unit on, make sure
that your home mains voltage corre-
sponds to the unit operating voltage.
•
Before the first use wash all the removable
parts (1, 2, 3) with warm water and neutral
detergent and then dry thoroughly.
•
Clean the motor unit (5) with a soft, slightly
damp cloth and then wipe it dry.
•
Do not immerse the motor unit (5) into
any liquids and do not wash it with
water.
•
Place the blender only on a flat steady
surface.
ATTENTION!
Continuous operation time of
the blender should not exceed 3 minutes;
then switch the unit off and let it cool down
to room temperature for at least 10 minutes.
•
Do not remove the blender bowl (3) and
the bowl lid (2) during the operation.
USING THE BLENDER
•
Install the blender bowl (3) on the motor
unit (5), to do this, take the bowl (3) by
the handle with your right hand, install the
bowl (3) on the motor unit (5) «
» and
turn the bowl (3) clockwise until it is fixed
«
».
•
Put the necessary ingredients into the
bowl (3).
•
Install the lid (2) into the bowl (3).
•
Insert the measuring cup (1) into the lid (2)
opening.
Notes:
–
Before starting to chop/mix, we recom-
mend to peel fruit, remove inedible parts,
such as stones, and cut fruit into cubes
approximately 2х2 cm in size.
–
The blender is not intended for beating
eggs, making potato mash, kneading
dough, extracting fruit or vegetable juice,
chopping hard or frozen foods, chopping
meat and meat products.
–
The amount of foodstuffs to be processed
should not exceed 2/3 of the capacity of
the bowl in which they are processed or
be below the minimal “0.2 l” mark of the
blender bowl.
–
For easy control of the amount of the pro-
cessed food there is a liquid level scale on
two sides of the blender bowl.
•
Make sure once again that the blender
bowl (3) is installed correctly and is fixed.
•
Insert the power plug into the mains
socket.
IM VT-8514.indd 4
01.11.2018 17:15:38
Summary of Contents for VT-8514
