Vitek VT-8433 Manual Instruction Download Page 5

Page: 5 / 28

ENGLISH

clicks, make sure the attachment is prop-
erly fixated.
To  remove  the  attachment  (1,  9  or  10)
press  and  hold  down  the  fixator  (3),
extract the attachment (1, 9 or 10) from
the attachment holder/handle (7).
To  get  the  best  results,  wash  your  hair
with shampoo, wipe with a dry towel, dry
with  a  hairdryer  and  comb  it.  After  that
you can start styling your hair.

Cone-shaped electric tongs (1),
electric tongs (9)

–

Select  the  necessary  attachment  (1
or  9)  and  insert  it  into  the  attach-
ment  holder/handle  (7)  until  the  fix-
ator clicks (3), make sure the attach-
ment is properly fixated.

–

Wear the thermal safety glove (11)
while using the attachments (1 or 9).

–

Divide the hair into locks 4-5 cm wide.

–

Place the unit on a flat heat-resistant
surface.

–

Insert the power plug into the mains
socket.

–

Switch the unit on by pressing the
power switch button (6) "

", the light

indicator (5) will light up.

–

Wait until the operating surface (2)
heats up.

–

Seize the hair lock with your free hand
in the safety thermal glove (11).

–

With  the  other  hand  hold  the  unit  by
its handle (7) and press the hair clamp
handle  (4),  place  the  tip  of  the  lock
onto  the  operating  surface  (2)  and
move  the  clamp  (4)  down.  Hold  your
hair  with  the  hand  in  the  safety  ther-
mal  glove  (11),  rotate  the  handle  (7)
with  the  other  hand  to  wrap  the  lock
around the operating surface (2).

–

Wait for a while, then press the clamp
handle (4) and release the hair lock.

–

Repeat this procedure on the rest of
your hair.

Notes:

–

when using the unit for the first time,
foreign smell can be produced. It is
normal.

–

do  not  touch  the  operating  surface
(2) with bare hands during the opera-
tion  of  the  unit,  hold  the  unit  by  the
operating  surface  (2)  with  the  hand
in thermal safety glove, hold the unit
by its handle with the other hand (7).

–

during breaks in operation, place the
unit on a flat heat-resistant surface.

–

do  not  comb  the  hair  immediately
after  curling,  let  it  cool  down  and
carefully  divide  big  locks  into  small-
er  ones  so  that  the  hairstyle  looks
natural.

–

After the operation switch the unit off
by pressing the power switch but-
ton (6), and then unplug it.

–

Place the unit on a flat heat-resistant
surface and let it cool down com-
pletely.

Hair straightening

–

Attachment – hair straightener (10)
can be used to straighten both long
and short hair.

–

Only  use  the  hair  straightener  (10)
attachment  on  healthy  undyed  and
not  permed  hair  or  use  it  along  with
special hair straightening products.

–

If your hair has already been dyed or
permed, only make an occasional use
of the straightener.

–

For the best results the hair should be
clean and dry.

–

Insert  the  attachment  (10)  into  the
attachment  holder/handle  (7)  until
the  fixator  clicks  (3),  make  sure  the
attachment is properly fixated.

–

Place the unit on a flat steady heat-
resistant surface.

–

Insert the plug into the socket, switch
the unit on by pressing the power

VT-8433_105 x148.indd 5

22.06.2018 10:45:02