6
ENGLISH
operating mode indicator will be shown on the dis-
play (3).
•
Put the unit on the base (7) on a flat heat-resistant sur-
face and let it heat up (approximately 2-3 minutes).
•
Take a hair lock with the free hand.
•
Press the clamp handle (4), place the end of the lock
on the operating surface (5) and move the clamp down.
Wind the lock around the operating surface.
•
Wait for a while, then press the clamp handle (4) and
release the hair lock.
•
Repeat this procedure on the rest of your hair.
Note:
– Do not touch the operating surface during the unit
operation.
– During the first operation some foreign smell and a small
amount of smoke from the operating surface is pos-
sible, this is normal.
– During breaks in operation, place the unit on a flat heat-
resistant surface.
– Do not comb your hair right after styling, let it cool off.
– Divide big locks into smaller ones carefully to make the
hairstyle look natural.
•
After you finish curling, switch the unit off by setting the
button (2) to the «
0
» position (off).
•
Remove the power plug from the mains socket.
•
Put the unit on the base (7) and let it cool down com-
pletely.
CLEANING AND CARE
•
Before cleaning unplug the unit and let it cool down
completely.
•
Do not immerse the unit, the power cord and the power
plug of the unit into water or other liquids.
•
Do not use detergents, abrasives, and any solvents to
clean the unit.
•
Clean the unit body with a soft, slightly damp cloth and
then wipe it dry.
STORAGE
•
Let the unit cool down completely and clean it before
taking away for storage.
VT-8423.indd 6
23.03.2016 10:06:12
