6
ENGLISH
•
Before plugging the unit in make sure that the oper-
ating voltage of the unit corresponds to the voltage
of your mains.
HAIR STRAIGHTENING
•
The unit can be used for both long and short hair.
•
Use the unit only on healthy undyed and not permed
hair or use it along with special hair straightening
products.
•
If your hair has been dyed or permed, use the unit
rarely.
•
For the best results the hair should be clean and dry.
•
Open the hair straightener moving clamp (5).
•
Put the unit on a flat steady and heat-resistant sur-
face.
•
Insert the power plug into the mains socket and
switch the unit on pressing the button (3); the on indi-
cator (2) will light up and flash.
Note: During the first operation some smell from the
heating element is possible, this is normal.
•
Set the required temperature using the wheel (6)
Hair type
Temperature
Damaged, colored,
bleached, fine
from +100°С to +160°С
Normal
from +160° С to +180° С
For professional styling
from +180° С to +220° С
•
Let the unit heat up to the required temperature, the
indicator (2) will glow constantly.
•
Divide combed hair into locks of equal width (about
5 cm).
•
Place the hair lock between the plates (1).
•
Hold the unit by its handle (4) and press the plates (1)
together.
•
Slide the heating plates (1) with little force to the
hair tips.
IMPORTANT: do not keep the plates on the same area
of the hair lock for more than 2 seconds.
•
After that start straightening the next hair lock.
IM VT-8404_70x130.indd 6
16.03.2017 12:03:13