3
ENGLISH
HAIR STRAIGHTENER VT-8403 BK
The unit is intended for hair straightening.
DESCRIPTION
1. Heating plates
2. Power indicator
3. Power switch «I/O»
4. Handle
5. Hair straightening plates lock
6. Hanging loop
ATTENTION!
Do not use this unit near containers filled with water (such
as a sink, bath etc.).
•
When using the unit in a bathroom, unplug it right after
usage by taking the power plug out of the mains socket,
as closeness of water is dangerous even if the unit is
switched off.
•
For additional protection you can install a residual cur-
rent device (RCD) with nominal operation current not
exceeding 30 mA into the bathroom mains; contact a
specialist for installation.
•
Place the hair straightener on a flat steady heat-
resistant surface. Make sure that the heating
plates and outer operating surfaces do not touch
fusible and inflammable objects (plastic, polyethyl-
ene, synthetic materials etc.).
SAFETY MEASURES
Before using the electrical unit, read this instruction manual
carefully and keep it for future reference.
Use the unit for intended purposes only, as specified in this
manual. Mishandling of the unit may lead to its breakage and
cause harm to the user or damage to property.
•
Before switching the unit on, make sure that voltage of
the mains corresponds to unit operating voltage.
•
Never leave the operating unit unattended.
•
Do not switch the unit on in places where aerosols are
sprayed or highly flammable liquids are used.
•
Hair spray should be applied only after hair straighten-
ing is finished.
•
Always unplug the unit immediately after usage and
before cleaning.
•
When unplugging the unit, pull the plug but not cord.
•
Do not touch the unit body and the power plug with
wet hands.
IM VT-8403_70x130.indd 3
30.07.2018 16:35:39
