Vitek VT-8244, Manual Instruction

Page: 5 / 40

5
ENGLISH
•
For children safety reasons do not leave polyethylene
bags used as packaging unattended.
ATTENTION! Do not allow children to play with polyethylene
bags or packaging film. Danger of suffocation!
•
Do not allow children to touch the unit body, the power
cord or the power plug during operation of the unit.
•
Do not leave children unattended to prevent using the
unit as a toy.
•
Close supervision is necessary when children or dis-
abled persons are near the operating unit.
•
This unit is not intended for usage by children. Place the
unit out of reach of children during the operation and
cooling down.
•
The unit is not intended for usage by physically or men-
tally disabled persons (including children) or by persons
lacking experience or knowledge if they are not under
supervision of a person who is responsible for their
safety or if they are not instructed by this person on the
usage of the unit.
•
Do not attempt to repair the unit. Do not disassemble
the unit by yourself, if any malfunction is detected or
after it was dropped, unplug the unit and apply to any
authorized service center from the contact address
list given in the warranty certificate and on the website
www.vitek.ru.
•
To avoid damages, transport the unit in the original
package only.
•
Keep the unit in a dry cool place out of reach of children
and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY,
ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION
AREAS AND WORK SPACES IS PROHIBITED.
USING THE HOT AIR BRUSH
After unit transportation or storage at low temperature
keep it for at least three hours at room temperature
before switching on.
•
Unpack the hot air styler and remove package materials.
•
Unwind the power cord completely.
•
Install one of the attachments (8, 9 or 10). To do this
insert the brush attachment into the installation place (1)
IM VT-8244_70x130.indd 5 09.01.2018 17:42:01