Vitek VT-8224, Manual Instruction

Page: 5 / 36

5
ENGLISH
• If the power cord is damaged, it should be replaced
by the manufacturer, a maintenance service or similar
qualified personnel to avoid danger.
•
Do not use the unit if the power cord or plug is damaged,
if the unit works improperly or after it was dropped.
•
Do not attempt to repair the unit. Do not disassemble
the unit by yourself, if any malfunction is detected or
after it was dropped, unplug the unit and apply to any
authorized service center at the contact addresses
given in the warranty certificate and on the website
www.vitek.ru.
• To avoid damages, transport the unit in the original
package only.
•
Keep the unit in a dry cool place out of reach of chil-
dren and disabled persons.
THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY,
ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION
AREAS AND WORK SPACES IS PROHIBITED.
USING THE HAIR DRYER
After unit transportation or storage at low tempera-
ture keep it for at least three hours at room tempera-
ture before switching on.
–
The unit is intended for operation from an AC power
network with the frequency of 50 or 60 Hz. The unit
does not need any additional settings for operating
with the required rated frequency.
– Before switching the unit on, make sure that your home
mains voltage corresponds to the unit operating voltage.
– Remove any advertisement stickers that can hinder
the unit operation.
– Unwind the power cord completely.
– Insert the power plug into the mains socket.
– Select the required operation mode using the
switch (1):
«0» – the hairdryer is switched off;
«1» – low temperature and speed airflow;
«2» – maximal temperature and speed airflow.
Note: During the first operation some foreign smell
and a small amount of smoke from the heating element
is possible, it is normal.
IM VT-8224_70x130.indd 5 29.11.2018 17:02:21