6
ENGLISH
– Insert the power plug into the mains socket.
– Select the required operation mode using the switch (1):
«
0
» – the hairdryer is switched off;
«
1
» – supply of warm air at low flow speed;
«
2
» – supply of hot air at maximal flow speed.
Note: During the first operation some foreign smell and a
small amount of smoke from the heating element is pos-
sible, it is normal.
– This model has a “cool” air function, use it to fix your
hairstyle. To supply “cool” air press and hold down the
button (2)
. Press the button (2) again to switch the
hot air supply on.
Nozzle
This model includes a nozzle (3). Use the nozzle when you
need to focus the drying power on a small area (for example,
a curl or a wave) or when you want to straighten wavy hair.
– Attach the nozzle (3) to the unit body. The nozzle allows
directing a narrow air flow of high intensity at a definite
hair lock.
– Insert the power plug into the mains socket. Use the
switch (1) to set the necessary operation mode.
Overheating protection
Overheating protection switches the hairdryer off if the
outgoing air flow is too hot. If the hairdryer switches off
during operation, set the operation mode switch (1) to the
“
0
” position, unplug the hairdryer and make sure that the
inlets and outlets are unblocked. Let the hairdryer cool
down for 5-10 minutes and switch it on again. Do not block
the air inlets during unit operation and avoid getting of hair
into its air inlet.
CLEANING AND CARE
– The hairdryer is intended for household use only.
– Set the switch (1) to the position «
0
» and disconnect the
hairdryer from the mains.
– You may wipe the unit body with a damp cloth and then
wipe it dry.
– Clean the air inlet grid (4) with a brush.
– Never immerse the unit into water or other liquids.
– Do not use abrasives and solvents to clean the unit body.
IM VT-8206_70x130.indd 6
24.07.2017 12:41:38
