Vitek VT-6606 BK, Manual Instruction, Page: 6 / 40

ENGLISH
6
Alarm setting
Note: If you want to select the radio as
an alarm signal, preliminary tune the
required radio station (see «Radio sta-
tions reception»).
–
In current time mode, press the «
» button (11) once, the alarm settings
will be shown on the display.
–
While the alarm settings are displayed,
press and hold the «
» button (11)
again. The hour digits will start flashing
on the display.
–
Set the necessary hour using the but-
tons (9) «
7
» and (8) «
8
».
–
Press the « » button (11), minute dig-
its will be flashing on the display.
–
Use the buttons (9) «
7
» and (8) «
8
»
to select the necessary minutes.
–
Press the « » button (11), alarm
repeating signal symbols according to
days of the week will be flashing on
the display.
–
Use the buttons (9) «
7
» and (8) «
8
»
to set the alarm repeating mode:
«1-1» — without repeat,
«1-5» — alarm signal repeating from
Monday to Friday,
«1-7» — alarm signal repeating seven
days a week,
«6-7» — alarm signal repeating on
Saturday and Sunday.
–
If you have set the «1-1» mode (with-
out repeat), press the «
» button
(11), and, using the buttons (9) «
7
»
and (8) «
8
», set the alarm day:
«MON» — Monday, «TUE» — Tuesday
and etc.
–
Press the « » button (11), alarm sig-
nal symbols will be flashing.
–
Use the buttons (9) «
7
» and (8) «
8
»
to select the necessary alarm signal:
sound signal (symbol «bu») or radio
(radio frequency appears)
–
If you have selected radio as alarm
signal, press the «
» button (11),
the alarm volume level symbols will be
flashing on the display.
–
Using the buttons (9) «
7
» and (8)
«
8
», set the desired volume level
(from «1» to «15»).
–
To finish the setting of the first alarm,
press the «
» button (11).
–
To view the alarm time, press the «
» button (11), the alarm settings
will be shown on the display (5) for
5 seconds.
–
To set the second alarm (« » but-
ton (10)), follow the steps described
above.
Note: If the buttons (9) «
7
» and (8) «
8
»
are not pressed within 30 seconds during
alarm setting, the unit will be switched to
the current time display mode.
Switching the alarms on/off
–
To switch the alarm on, while in current
time mode, press and hold the cor-
responding button (11) «
» or (10)
« » until the corresponding indicator
appears on the display.
–
To switch the alarm off, press and hold
the corresponding button while in the
current time mode again. The alarm
symbol will go out.
Snooze
–
You can switch off the alarm signal
for 9 minutes by pressing the but-
ton (3) «SNOOZE/SLEEP/DIMMER».
The symbol of the selected alarm will
be flashing; the alarm signal will be
repeated in 9 minutes.
–
To switch the alarm sound signal off,
press the «
» button (4).
Note: The alarm/radio signal will sound
during 30 minutes if you do not press
any buttons.
VT-6606.indd 6 29.05.2014 9:11:30