8
ENGLISH
signal will be repeated. You can repeat this procedure dur-
ing 1 hour.
Alarm switch off
•
To switch the alarm sound signal off press the button (7)
«
SOURCE/AL. OFF/ ».
Display brightness setup
•
In the current time mode press the button
(4)
«DIMMER»
repeatedly to set up the necessary display
(14) brightness.
Radio stations reception
•
Connect the unit to the mains and consequently press
the button (7) «
SOURCE/AL. OFF/ »
to select the nec-
essary frequency range: FM or AM.
•
Use the buttons (2) «
MIN/
9
»
or (3) «
HOUR/
:
»
, for
tuning in the desired radio station frequency.
•
Manual tuning:
consequently press the buttons (2)
«
MIN/
9
»
or (3) «
HOUR/
:
»
, for tuning in to the
desired radio station frequency.
•
Auto tuning:
press and hold the button (2) «
MIN/
9
»
or (3) «
HOUR/
:
»
for approximately one second. The
tuner begins scanning and automatically holds after
receiving a strong radio station signal.
•
To switch the radio off press and hold the button (7)
«
SOURCE/AL. OFF/ »,
the symbol «
OFF
», will appear
on the display, and after that the unit will be switched to
the current time mode.
•
For the best radio stations reception in the FM-range it
is recommended to unwind the FM-antenna (16) cable
and place the cord optimally.
•
Radio stations reception in the AM range is performed
by the inner magnetic antenna. Change the clock radio
position for the best reception.
Note: Since different factors, such as clock radio
position in the room, number of floors etc, effect the
reception quality, we recommend to place the unit as
close to the window as possible for the best reception.
Volume level adjusting
To set up the desired volume level use the buttons (5)
«AL2/– »
and (6)
«AL1/+ »
.
VT-6602_IM_70x130.indd 8
01.07.2015 12:49:09
