Vitek VT-3591 GY, Manual Instruction, Page: 5 / 24

ENGLISH
5
– remove the batteries if you are
not planning to use the radio for
a long time.
•
Before connecting the radio
to the mains, make sure that
your home mains voltage cor-
responds to the unit operating
voltage. If the unit is equipped
with the voltage selector (12)
make sure that it is set to the
voltage corresponding to your
region.
•
Insert the power plug into the
mains socket. The batteries
installed in the battery compart-
ment will be switched off.
•
Switch the radio on by turn-
ing the volume control (2)
«VOLUME/OFF» down until click-
ing, the indicator (5) «POWER»
will light up.
•
Select the desired range with
the band switch «FM/AM».
•
Tune to the desired radio sta-
tion using the tuning knob
«TUNING».
•
To set the desired volume level,
use the volume control (2)
«VOLUME/OFF».
Notes:
– for better reception in FM range
extend antenna (8) completely
and place it under the desired
angle;
– the built-in antenna receives
signal in AM range; for better
reception in AM range try to
place the radio horizontally and
direct it to the transmitting radio
station.
•
After you finish listening switch
the unit off by turning the vol-
ume control (2) «VOLUME/OFF»
upwards until clicking.
EARPHONES CONNECTION
To listen to the radio via earphones
(not included) connect them to the
jack (3) «PHONE». Set the desired
volume level using the volume but-
ton (2) «VOLUME/OFF». When con-
necting the earphones the radio
speaker will be switched off auto-
matically.
ATTENTION! Do not set high vol-
ume while using the earphones.
To prevent impairment of hear-
ing when listening to the radio via
the earphones do not set too high
volume, the experts advise not to
listen to the radio at a high volume
for a long time.
Line output jack «LINE IN» (11)
You can connect an external audio
device, such as CD or MP3 player,
via a line output jack (11).
CLEANING AND CARE
•
Clean the radio body with a soft,
slightly damp cloth and then
wipe it dry.
•
Never use abrasives or solvents.
•
Do not immerse the power cord,
the power plug or the radio itself
into water or other liquids.
IM VT-3591_105x148.indd 5 20.07.2017 16:54:58