Vitek VT-3525 SR, Instruction Manual, Page: 3 / 44

ENGLISH
3
INSTRUCTION MANUAL
1. LED Display
2. FM/AM band switch
3. Sound Volume Increase button
4. Sound Volume Decrease button
5. Power cord
6. Battery compartment
7. FM antenna cord
8. Radio Setting wheel
9. Set Alarm 2 button
10. Set Alarm 1 button
11. Band scale with indicator
12. Set Time button
13. Select Alarm 1/2/1+2 button
14. Power On-Off / Alarm On-Off button
15. Audio input
16. Alarm Temporary Switch Off / Switch
Off By Timer button
17. Reset button
18. Device mounting bracket
19. Nameplate (attached to the back side
of the device)
Connecting the power
Plug the cord to the AC power outlet.
Then press the Reset button (17) using
a ball-point pen. The clock is equipped
with a back-up power element consist-
ing of a flat lithium battery of 3V. Insert
the battery to its compartment observing
the right polarity towards the terminals
located in the compartment.
NOTE: When the main power supply
is cut off, the clock automatically gets
powered from the battery, keeping the
memory data and time. When the main
power supply is resumed, the clock
switches back to the AC power.
Attention
If you don’t use the clock, disconnect it
from the power supply. In order to avoid
electric shock, do not remove the device
back cover. There are no user servicea-
ble parts inside. To prevent fire or electric
shock hazard, do not expose the unit to
moisture or water.
Digital Clock mode
Analogous Clock mode
Digital clock mode
NOTE:
Time setting/Alarm setting/Switch off by
timer functions are working only in the
Digital Clock mode.
3
3525.indd 3 3525.indd 3 26.07.2006 11:45:07 26.07.2006 11:45:07