4
ENGLISH
be caused by improper usage of
the unit.
• For children safety reasons do not
leave polyethylene bags, used as a
packaging, unattended.
• Attention!
Do not allow children to
play with polyethylene bags or film.
Danger of suffocation
!
• Keep the unit out of reach of children.
THE UNIT IS INTENDED FOR
HOUSEHOLD USE ONLY
Power connection
In case of unit transportation or
storage at low temperature it is
necessary to keep it for at least two
hours at room temperature before
switching on.
– Make sure that unit operating
voltage corresponds to voltage of
your mains.
– The unit is equipped with an
integrated backup battery supply
system, that allows to save settings
of current time, timer, alarm and
recorded radio stations in case of AC
supply voltage interruption. Once
the voltage gets normal, the unit will
be switched to the mains supply.
– Open the battery compartment lid
(18) having preliminary unscrewed
the fixing screw. Insert a CR2032
battery (not included), with the
“plus” upward.
– Close the battery compartment lid
(18) and tighten up the screw.
– To connect the unit to the mains
insert the plug of the power cord
(16) into the socket.
Attention!
Batteries leakage can cause injuries
or unit damage. In order to avoid the
unit damage, follow the following
instructions:
• insert a battery following the polarity
(“plus” upward);
• remove the battery if you are not
planning to use the unit for a long
time;
• do not dismantle the battery, do not
subject it to high temperatures;
• replace the batteries in time.
Date and time setting
– Plug the unit into the mains.
– Press and hold the «CLK.ADJ.»
button (13). The year digits will start
flashing on the display.
– Select the necessary year by
repeatedly pressing or holding the
buttons (3) and (5).
– Press the «CLK.ADJ. »
button (13)
.
The month digits will start flashing
on the display.
– Use the buttons (3) « » and (5) « »
to select the necessary month.
– Press the «CLK.ADJ. »
button (13)
.
The day digits will start flashing on
the display.
– Use the buttons (3) and (5) to select
the necessary day.
– Press the
«
CLK.ADJ.
»
button
(13), time format symbols will start
flashing on the display: 24 hours (24
Hr) or 12 hours (12 Hr).
– Use the buttons (3) and (5) to select
the time format (12 Нr or 24 Нr).
– Press the «CLK.ADJ.» button (13).
The hour digits will start flashing on
the display.
– Use the buttons (3) and (5) to select
the necessary hour.
Note:
To set the afternoon time in 12
hours format (12 Hr) press the buttons
(3) and (5) consequently until the
indicator (8) «PM» appears.
– Press the «CLK.ADJ.
»
button (13)
.
The minute digits will start flashing
on the display.
– Use the buttons (3) and (5) to select
the necessary minutes.
– To finish the setup procedure press
the
«
CLK.ADJ.» button (13).
Note:
If buttons (3) and (5) are not
being pressed within 30 seconds while
setup process, the unit will be switched
to the current time mode.
Current date view
– To view the date in the current time
mode (radio is off) press the «Y-M-
D» button (3).
– To view the year, current date and
time consequently press the «Y-M-
D» button (3).
VT-3524_IM.indd 4
17.01.2013 13:37:36
